![]() You will have to play around with this a bit to get it the right height for your chickens. Place the feeder so the opening is a few inches above the coop floor.Make sure the top of the wood is at least 3″ below where you will want the top of the feeder so it does not get in the way of the lid. This makes the feeder stick out enough from the wall that it is easy to get the cap off and on. Screw a piece of scrap wood about a foot long and 1/2″-1″ thick to the wall with 2 screws.While there are more heavy duty caps available, we decided to go with a drain cap as it was 1/2 the price and did the job.Īttaching it to the wall of the chicken coop: Attach the 45° elbow on the end of the 90° elbow.Just push it on as tight as you can it will stay there. Attach the 90° elbow to one end of the pipe.When we went to the store this time we found an off-cut of pipe that was just less than 2′ long, there was no price on it and when we asked, the guy at the store gave it to us for free! It doesn’t hurt to ask. Later in the year we added to our flock and decided we needed another feeder. Don’t worry about making a perfect cut as this will be covered. We are not professional pipe cutters, so there may be a better way, but we made do with what we had. We started by using the hack saw to cut it enough that there was a hole for the jigsaw blade to fit through, then finished it off with the jigsaw. The shortest length of PVC piping we could find was 3′, this was enough for 2 feeders when cut in half.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |